FAQ SUPPORT

For information regarding the oil capacity for your engine, please visit our Oil Capacity FAQ.

Oil Recommendation

• SAE 30 40°F and higher (5°C and higher) is good for all purpose use above 40°F, use below 40°F will cause hard starting.

• 10W-30 0 to 100 °F (-18 to 38 °C) is better for varying temperature conditions. This grade of oil improves cold weather starting, but may increase oil consumption at 80°F(27°C) or higher.

• Synthetic 5W-30 -20 to 120 °F (-30 to 40 °C) provides the best protection at all temperatures as well as improved starting with less oil consumption.

• 5W-30 40 °F and below (5 °C and below) is recommended for winter use, and works best in cold conditions.

Type of oil to use

• Use a high quality detergent oil classified "For Service SF, SG, SH, SJ" or higher.

• Do not use special additives.

• Choose a viscosity according to the table above.

To view the most current information on oil type, please view/print your engine Operator's Manual online.

Engine Break-in procedures for both Synthetic and standard oil remain the same.

NOTE: Please read and abide by any applicable Safety Information (PDF) before performing any engine work. This information is not meant to take the place of work performed by a Briggs & Stratton Authorized Dealer. Terms and Conditions apply to all of our information provided on this website. Always be sure to read and understand your engine Operator's Manual.